If you are planning a new kitchen in Mohali, Chandigarh, Panchkula or Zirakpur, the first question is almost always the same: how much will a modular kitchen cost? The honest answer is that it depends on a handful of decisions you control. This guide explains those decisions, gives indicative 2026 budgets, and shows where it is (and is not) safe to save.
How much does a modular kitchen cost in 2026?
Across the projects we design and manufacture in Mohali, most modular kitchens fall between ₹1 lakh and ₹12 lakh. The table below shows where typical kitchens land. These are indicative ranges, not fixed prices: your exact figure depends on measurements, materials and hardware.
| Budget tier | Indicative cost | Typical kitchen |
|---|---|---|
| Essential | ₹1 – 2.5 lakh | Straight-line or compact L-shape, laminate shutters, standard soft-close hinges |
| Mid-range | ₹2.5 – 5 lakh | L-shape, U-shape or parallel, laminate + acrylic, tandem drawers, corner unit |
| Premium | ₹5 – 12 lakh | Large U-shape or island, PU or glass finishes, premium European hardware, tall units, built-in appliances |
A 2BHK flat in Mohali or Zirakpur with a 9–10 ft L-shaped kitchen usually sits in the mid-range tier. Independent houses and kothis in Chandigarh and Panchkula, which often have larger kitchens with an island or a separate utility area, more often fall in the premium tier.
What decides the price of a modular kitchen?
Six things account for almost all of the difference between two quotes.
- Size and layout. Price scales with the running length of base and wall cabinets. A U-shape uses more cabinetry than an L-shape of the same room; an island adds a full extra run. See our kitchen layout guide to compare.
- Carcass material. The cabinet box is usually HDHMR board or BWP plywood. Both are moisture-resistant, but they differ in cost and weight. Our HDHMR vs plywood guide explains which to use where.
- Shutter finish. Laminate is the most economical; acrylic, PU paint and glass cost progressively more. Read the kitchen finishes comparison.
- Hardware. Hinges, drawer systems and lift-up fittings from established European brands cost more but run smoothly for years. Details are in our hardware guide.
- Accessories. Corner carousels, pull-out pantries, wicker baskets and cutlery organisers each add to the total.
- Countertop and appliances. Granite, quartz and solid surfaces vary widely, and a built-in oven, microwave, chimney or dishwasher can add as much as the cabinets themselves.

How is a modular kitchen priced: per square foot or per module?
You will see both. Some companies quote per square foot of shutter area, others per running foot, and others per module (each base unit, wall unit and tall unit priced separately). None of these is wrong, but they make quotes hard to compare.
The fairest way to compare two companies is to ask each for an itemised estimate for the same design, with separate lines for:
- carcass (material and thickness)
- shutters (finish, both sides)
- hardware (brand and model of hinges, channels or tandem boxes)
- accessories (each one listed)
- countertop, sink and tap
- appliances
- installation, transport and taxes
If a quote is a single lump sum, ask for the breakdown before you decide.
Where should you spend, and where can you save?
Spend on what you cannot easily replace later:
- a moisture-resistant carcass, especially for the sink unit
- good hinges and drawer systems, because you use them dozens of times a day
- proper edge-banding on every exposed edge
Save where it barely affects daily use:
- use laminate on base units and a premium finish only on visible wall units
- keep to standard module widths instead of many custom sizes
- add accessories you will actually use; a well-planned drawer often beats a specialist basket
- buy freestanding appliances first and upgrade to built-ins later if needed
How long does it take, and does that affect cost?
After you approve the final design, Delma usually needs 35 to 40 days to manufacture and install a modular kitchen. Solid wood finishes take around 75 days because of the extra crafting. Rushed timelines rarely save money, but delays in civil work (tiling, plumbing and electrical points) can push the schedule, so finish those before the final measurement.
Getting an accurate price for your kitchen
A designer visiting your site, measuring the room and noting window, door, plumbing and electrical positions gives you a figure you can rely on. Delma starts with a free design consultation in Mohali, Chandigarh and Panchkula; our designer measures your space, prepares a 3D design and gives you an itemised estimate. Explore our L-shape, U-shape and parallel kitchens to see what each budget looks like, or request your free quote.